{
  "schema": "labwired.browser-scope-observation/v1",
  "observed_date_utc": "2026-11-14",
  "site_url": "https://app.labwired.com/?board=capacitive-touch-lab&panel=scope",
  "source_model": "https://github.com/w1ne/labwired-core/blob/611ecd3d461aaca0bcab3d974dec1f3f75019f9b/examples/capacitive-touch-lab/system.yaml",
  "source_firmware": "https://github.com/w1ne/labwired-core/blob/611ecd3d461aaca0bcab3d974dec1f3f75019f9b/examples/capacitive-touch-lab/src/main.cpp",
  "environment": "Anonymous hosted browser Playground, Chromium 156 via DevTools; oscilloscope panel open, demo auto-running",
  "method": "Read CH1 D2 and CH2 D4 oscilloscope summary after loading, hold the graphical Touch Pad by pointer press for 2 seconds, release and read again 2 seconds later.",
  "states": {
    "before": {
      "pad_pressed": false,
      "playground_running": true,
      "channels": {
        "CH1": {
          "mean_volts": 2.039,
          "frequency_khz_estimate": 15.02
        },
        "CH2": {
          "mean_volts": 1.905,
          "frequency_khz_estimate": 15.04
        }
      }
    },
    "pressed": {
      "pad_pressed": true,
      "playground_running": true,
      "channels": {
        "CH1": {
          "mean_volts": 2.428,
          "frequency_khz_estimate": 3.61
        },
        "CH2": {
          "mean_volts": 1.93,
          "frequency_khz_estimate": 3.61
        }
      }
    },
    "released": {
      "pad_pressed": false,
      "playground_running": true,
      "channels": {
        "CH1": {
          "mean_volts": 1.83,
          "frequency_khz_estimate": 13.27
        },
        "CH2": {
          "mean_volts": 1.74,
          "frequency_khz_estimate": 13.14
        }
      }
    }
  },
  "negative_control": "Releasing the same pad returns the data-touch-pad-pressed marker to false and increases the displayed CH2 frequency estimate.",
  "limits": [
    "One uncontrolled session, three time-separated displayed estimates, no repeatability distribution",
    "Frequency/mean are UI oscilloscope estimates, not raw exported samples or a device-accuracy calibration",
    "No UART count or LED assertion was measured in this browser run",
    "No original HeyPCB imported PCB, real sensor, or whole-board electrical/firmware verification was measured"
  ]
}
