Falstad CircuitJS vs LabWired: choose by the test you need.
Falstad CircuitJS is a browser-based electronic circuit simulator with animated voltages and currents, editable components, and a large set of example circuits. LabWired connects supported circuit models with executing microcontroller firmware, test assertions and PCB workflows. These products solve different verification problems. No matched performance or accuracy benchmark establishes that either is better overall.
Electronic circuit simulation: what is different?
| Engineering question | Falstad CircuitJS | LabWired |
|---|---|---|
| Can I explore an analog circuit in a browser? | Yes. Edit example circuits, components and switches and inspect animated voltage and current. | Yes, for linear resistor, inductor, capacitor, source and switch networks with supported waveforms. |
| Can I simulate nonlinear diodes or transistors? | Yes. CircuitJS includes such component models; validate them against your required operating conditions. | Not in the browser adapter. A separate native ngspice co-simulation path can use suitable vendor models. |
| Can I execute my MCU firmware and inspect connected signals? | Falstad has an AVR8js variant. Do not assume a general STM32 or ESP32 firmware execution path in the standard circuit editor. | Runs real firmware on supported STM32, ESP32 and RP2040 models, with modeled GPIO, ADC and peripherals. Check model-specific limits. |
| Can I inspect an existing PCB? | CircuitJS is a circuit editor and simulator, not a KiCad PCB import coverage workflow. | KiCad PCB imports can report mapped parts and unsupported components; an import is not automatically a simulation. |
| Can I produce a verification gate? | Useful for interactive circuit exploration; its published JavaScript interface also permits programmatic control. | Supports deterministic firmware assertions and scoped circuit verification for implemented models, including negative controls. |
Comparison of documented workflows, not a measured fidelity, benchmark-speed, pricing or component-count ranking. Falstad and LabWired require representative models and real-board tests for physical acceptance.
Two reproducible starting points
- Explore an electrical model. Open the Falstad simulator, select a built-in resistor-capacitor example, change one resistor and inspect the voltage response. The official JavaScript interface guide explains how to automate an embedded CircuitJS instance.
- Verify firmware-circuit interaction. Open LabWired's Arduino Nano capacitive-touch lab. The browser oscilloscope shows the D4 drive and D2 pad voltage. For an STM32 RC time-constant assertion, see the separate native firmware + circuit test.
- Use the correct solver. For detailed transistor behavior, vendor macromodels, or AC/DC sweeps, use a capable SPICE engine such as LTspice or ngspice. LabWired's browser adapter does not provide those analyses.
When to choose each simulator
Choose Falstad for teaching, interactive circuit exploration, and quick checks with its available analog and digital models. Choose LabWired when the important question is how a supported firmware binary drives a connected circuit, peripheral or bus, or when you need explicit model coverage after a KiCad PCB import.
For an unsupported MCU, regulator or analog device, do not substitute a similar model and report a full-board pass. The seven-board KiCad evidence study shows exactly why imported source, mapped components and a simulated whole board are different stages. None of those seven boards has a verified whole-board simulation.
Sources and test limits
Falstad simulator · CircuitJS author and AVR8js credits · CircuitJS programmatic interface · LabWired browser/native model reference · LabWired reproducible examples
Source review: 10 November 2026. These tools may change; test the exact model and firmware version used by your project.