MCU board

pic24f08ka101

The pic24f08ka101 is an MCU board in the LabWired part catalog. Its catalog type is pic24f08ka101. The catalog gives a supply range of 1.8–3.6 V. It has 20 pins. Silicon coverage for this board is tracked in the chip × peripheral validation matrix, not per-part.

Key facts

Category	MCU boards
Catalog type	`pic24f08ka101`
Supply range	1.8–3.6 V
Pins	20
Datasheet	PIC24F16KA102 Family Data Sheet (DS39927C)

What LabWired simulates

What is simulated

MCU board

How it was validated

Not applicable. No device model to validate — see what is simulated, above.

pic24f08ka101 pinout

Other signals: RA0, RA1, RA2, RA3, RA4, RA5, RA6, RB0, RB1, RB2, RB4, RB7, RB8, RB9, RB12, RB13, RB14, RB15, VSS, VDD

Pin	Electrical type	Function
`RA0`	Bidirectional	—
`RA1`	Bidirectional	—
`RA2`	Bidirectional	—
`RA3`	Bidirectional	—
`RA4`	Bidirectional	—
`RA5`	Bidirectional	—
`RA6`	Bidirectional	—
`RB0`	Bidirectional	—
`RB1`	Bidirectional	—
`RB2`	Bidirectional	—
`RB4`	Bidirectional	—
`RB7`	Bidirectional	—
`RB8`	Bidirectional	—
`RB9`	Bidirectional	—
`RB12`	Bidirectional	—
`RB13`	Bidirectional	—
`RB14`	Bidirectional	—
`RB15`	Bidirectional	—
`VSS`	power_out	—
`VDD`	power_out	—

How to simulate the pic24f08ka101 in LabWired

Open the Playground at app.labwired.com and select the pic24f08ka101 as the board.
Write the firmware, then build it and run it.
Add parts from the catalog and connect them to the board pins. The categories below list the parts by bus.
Before you trust a result, look at the validation matrix. It shows which chip peripherals are modelled and how each one was checked.

Parts to connect to the pic24f08ka101

Related MCU boards

All MCU boards · All parts

Modelled from PIC24F16KA102 Family Data Sheet (DS39927C).

Wire it up in Playground → See the full validation matrix