instrument or tool

can-diagnostic-tool

The can-diagnostic-tool is an instrument or tool in the LabWired part catalog. Its catalog type is can-diagnostic-tool. It has 3 pins. A device model in the simulation engine, reached through a dedicated dispatch path rather than the peripheral registry.

From the catalog: Compiles to can-diagnostic-tester / uds-tester PeripheralKits (Transport::Can).

Key facts

Category	Instruments and tools
Catalog type	`can-diagnostic-tool`
Pins	3

What LabWired simulates

What is simulated

Simulated device model

How it was validated

Built from the datasheet. Implemented from the part’s register documentation and exercised by automated tests. Nothing physical was ever placed next to it.

can-diagnostic-tool pinout

Power: GND
Other signals: CAN_H, CAN_L

Pin	Electrical type	Function
`CAN_H`	Passive	—
`CAN_L`	Passive	—
`GND`	Power input	Supply

How to simulate the can-diagnostic-tool in LabWired

Open the Playground at app.labwired.com and place an MCU board.
Add the can-diagnostic-tool (catalog type can-diagnostic-tool).
Connect GND to the supply and ground of the board.
Connect CAN_H and CAN_L as your circuit needs.
Run the firmware. It drives and reads the pins of the part, and the device model responds on those pins.

Related Instruments and tools

All Instruments and tools · All parts

No manufacturer datasheet is indexed for this part yet, so none is linked here.

Wire it up in Playground → See the full validation matrix