LabWired The easy way to build hardware
instrument or tool

multimeter

The multimeter is an instrument or tool in the LabWired part catalog. Its catalog type is multimeter. It has 3 pins. A measurement tool rendered over the simulation rather than a device on the board.

From the catalog: Lowers into the analog island as the load a real DMM puts on the circuit (10 MΩ on V, a 0 V sense source on A, a 1 V / 10 kΩ test source on Ω); the reading is computed from the traced probes. Reads "—" on a net the MNA solver does not fully model.

multimeter in LabWired
Rendered by the matching LabWired editor component.

Key facts

CategoryInstruments and tools
Catalog typemultimeter
Pins3

What LabWired simulates

What is simulated

Instrument

How it was validated

Not applicable

multimeter pinout

PinElectrical typeFunction
V Passive —
COM Passive —
A Passive —

How to simulate the multimeter in LabWired

  1. Open the Playground at app.labwired.com and place the multimeter on the canvas.
  2. A measurement tool rendered over the simulation rather than a device on the board.

Related Instruments and tools

All Instruments and tools · All parts