STM32F746G-DISCO

The STM32F746G-DISCO is an MCU board in the LabWired part catalog. Its catalog type is stm32f7-discovery. Silicon coverage for this board is tracked in the chip × peripheral validation matrix, not per-part.

Key facts

Category	MCU boards
Catalog type	stm32f7-discovery
Datasheet	STM32F746xx datasheet

What LabWired simulates

How to simulate the STM32F746G-DISCO in LabWired

1. Open the Playground at app.labwired.com and select the STM32F746G-DISCO as the board.
2. Write the firmware, then build it and run it.
3. Add parts from the catalog and connect them to the board pins. The categories below list the parts by bus.
4. Before you trust a result, look at the validation matrix. It shows which chip peripherals are modelled and how each one was checked.

Parts to connect to the STM32F746G-DISCO

• I²C devices (43)
• SPI devices (19)
• UART devices (8)
• Board I/O modules (55)
• Logic ICs (8)
• Passive, analog and power parts (40)
• Wireless (1)

Related MCU boards

• stm32h735 datasheet linked
• STM32F411CEU6 Black Pill datasheet linked
• Teensy 4.1 datasheet linked
• STM32F401CDU6 Black Pill datasheet linked
• adafruit-feather-esp32-v2 datasheet linked
• STM32F401 Black Pill (legacy type) datasheet linked
• Arduino Uno datasheet linked
• STM32 Dev Board datasheet linked

All MCU boards · All parts

Modelled from STM32F746xx datasheet.