LabWired The easy way to build hardware
MCU board

Adafruit ESP32 Feather V2

The Adafruit ESP32 Feather V2 is an MCU board in the LabWired part catalog. Its catalog type is adafruit-feather-esp32-v2. Silicon coverage for this board is tracked in the chip × peripheral validation matrix, not per-part.

Adafruit ESP32 Feather V2 in LabWired
Rendered by the matching LabWired editor component.

Key facts

CategoryMCU boards
Catalog typeadafruit-feather-esp32-v2
DatasheetESP32 series datasheet

What LabWired simulates

What is simulated

MCU board

How it was validated

Not applicable

How to simulate the Adafruit ESP32 Feather V2 in LabWired

  1. Open the Playground at app.labwired.com and select the Adafruit ESP32 Feather V2 as the board.
  2. Write the firmware, then build it and run it.
  3. Add parts from the catalog and connect them to the board pins. The categories below list the parts by bus.
  4. Before you trust a result, look at the validation matrix. It shows which chip peripherals are modelled and how each one was checked.

Parts to connect to the Adafruit ESP32 Feather V2

Related MCU boards

All MCU boards · All parts

Further reading

Modelled from ESP32 series datasheet.