LabWired The easy way to build hardware
MCU board

atmega1281

The atmega1281 is an MCU board in the LabWired part catalog. Its catalog type is atmega1281. The catalog gives a supply range of 1.8–5.5 V. It has 61 pins. Silicon coverage for this board is tracked in the chip × peripheral validation matrix, not per-part.

Key facts

CategoryMCU boards
Catalog typeatmega1281
Supply range1.8–5.5 V
Pins61
DatasheetATmega640/1280/1281/2560/2561 datasheet (DS40002211A)

What LabWired simulates

What is simulated

MCU board

How it was validated

Not applicable. No device model to validate — see what is simulated, above.

atmega1281 pinout

PinElectrical typeFunction
PA0 Bidirectional —
PA1 Bidirectional —
PA2 Bidirectional —
PA3 Bidirectional —
PA4 Bidirectional —
PA5 Bidirectional —
PA6 Bidirectional —
PA7 Bidirectional —
PB0 Bidirectional —
PB1 Bidirectional —
PB2 Bidirectional —
PB3 Bidirectional —
PB4 Bidirectional —
PB5 Bidirectional —
PB6 Bidirectional —
PB7 Bidirectional —
PC0 Bidirectional —
PC1 Bidirectional —
PC2 Bidirectional —
PC3 Bidirectional —
PC4 Bidirectional —
PC5 Bidirectional —
PC6 Bidirectional —
PC7 Bidirectional —
PD0 Bidirectional —
PD1 Bidirectional —
PD2 Bidirectional —
PD3 Bidirectional —
PD4 Bidirectional —
PD5 Bidirectional —
PD6 Bidirectional —
PD7 Bidirectional —
PE0 Bidirectional —
PE1 Bidirectional —
PE2 Bidirectional —
PE3 Bidirectional —
PE4 Bidirectional —
PE5 Bidirectional —
PE6 Bidirectional —
PE7 Bidirectional —
PF0 Bidirectional —
PF1 Bidirectional —
PF2 Bidirectional —
PF3 Bidirectional —
PF4 Bidirectional —
PF5 Bidirectional —
PF6 Bidirectional —
PF7 Bidirectional —
PG0 Bidirectional —
PG1 Bidirectional —
PG2 Bidirectional —
PG3 Bidirectional —
PG4 Bidirectional —
PG5 Bidirectional —
RESET Input —
VCC Power input Supply
GND Power input Supply
XTAL1 Input —
XTAL2 Bidirectional —
AREF Input —
AVCC Power input Supply

How to simulate the atmega1281 in LabWired

  1. Open the Playground at app.labwired.com and select the atmega1281 as the board.
  2. Write the firmware, then build it and run it.
  3. Add parts from the catalog and connect them to the board pins. The categories below list the parts by bus.
  4. Before you trust a result, look at the validation matrix. It shows which chip peripherals are modelled and how each one was checked.

Parts to connect to the atmega1281

Related MCU boards

All MCU boards · All parts

Modelled from ATmega640/1280/1281/2560/2561 datasheet (DS40002211A).