brd2709a

The brd2709a is an MCU board in the LabWired part catalog. Its catalog type is brd2709a. Silicon coverage for this board is tracked in the chip × peripheral validation matrix, not per-part.

Key facts

Category	MCU boards
Catalog type	brd2709a
Datasheet	EFR32MG26 Mighty Gecko datasheet

What LabWired simulates

How to simulate the brd2709a in LabWired

1. Open the Playground at app.labwired.com and select the brd2709a as the board.
2. Write the firmware, then build it and run it.
3. Add parts from the catalog and connect them to the board pins. The categories below list the parts by bus.
4. Before you trust a result, look at the validation matrix. It shows which chip peripherals are modelled and how each one was checked.

Parts to connect to the brd2709a

• I²C devices (41)
• SPI devices (19)
• UART devices (7)
• Board I/O modules (50)
• Logic ICs (8)
• Passive, analog and power parts (37)
• Wireless (1)

Related MCU boards

• ESP32 datasheet linked
• arduino-zero datasheet linked
• ESP32-C3 Super Mini datasheet linked
• arduino-nano datasheet linked
• esp32-c6-devkitc-1 datasheet linked
• Arduino Uno R4 Minima datasheet linked
• esp32-s3-devkitc-1 datasheet linked
• Arduino Uno datasheet linked

All MCU boards · All parts

Modelled from EFR32MG26 Mighty Gecko datasheet.