LabWired The easy way to build hardware
passive, analog or power part

Capacitor

The Capacitor is a passive, analog or power part in the LabWired part catalog. Its catalog type is capacitor. It has 2 pins. No device model of its own. On a signal net it is an element of the in-core analog circuit, solved next to the running firmware; wired only across supply rails (a decoupling capacitor, for example) it stays wiring only. Semiconductor models are large-signal, with no device capacitance.

Capacitor in LabWired
Rendered by the matching LabWired editor component.

Key facts

CategoryPassive, analog and power parts
Catalog typecapacitor
Pins2

What LabWired simulates

What is simulated

Analog circuit element

How it was validated

Not applicable

Capacitor pinout

PinElectrical typeFunction
1 Passive —
2 Passive —

How to simulate the Capacitor in LabWired

  1. Open the Playground at app.labwired.com and place an MCU board.
  2. Add the Capacitor (catalog type capacitor).
  3. Connect pin 1 and pin 2 as your circuit needs.
  4. Run the firmware. When the part is in an analog circuit, as described above, the in-core analog solver computes it next to the firmware.

Related Passive, analog and power parts

All Passive, analog and power parts · All parts