Inductor

The Inductor is a passive, analog or power part in the LabWired part catalog. Its catalog type is inductor. It has 2 pins. No device model of its own. On a signal net it is an element of the in-core analog circuit, solved next to the running firmware; wired only across supply rails (a decoupling capacitor, for example) it stays wiring only. Semiconductor models are large-signal, with no device capacitance.

Key facts

What LabWired simulates

Inductor pinout

• Other signals: 1, 2

How to simulate the Inductor in LabWired

1. Open the Playground at app.labwired.com and place an MCU board.
2. Add the Inductor (catalog type inductor).
3. Connect pin 1 and pin 2 as your circuit needs.
4. Run the firmware. When the part is in an analog circuit, as described above, the in-core analog solver computes it next to the firmware.

Related Passive, analog and power parts

• iolink-transceiver Wiring only
• Diode Analog circuit element
• LiPo battery + charger Analog (ADC) · Built from the datasheet
• dc-barrel-jack Wiring only, or a source when its voltage is set
• LM2596 Buck Converter Wiring only
• crystal Wiring only
• lm358 Analog circuit element
• Capacitor Analog circuit element

All Passive, analog and power parts · All parts

Modelled from Bourns SRR1260 inductor datasheet.