LabWired The easy way to build hardware
passive, analog or power part

AMS1117 LDO

The AMS1117 LDO is a passive, analog or power part in the LabWired part catalog. Its catalog type is ams1117. It has 3 pins. Placeable and checked electrically (nets, rails, connectivity), but it has no runtime behaviour of its own.

From the catalog: LDO regulator; electrical only.

AMS1117 LDO in LabWired
Rendered by the matching LabWired editor component.

Key facts

CategoryPassive, analog and power parts
Catalog typeams1117
Pins3
DatasheetAMS1117 linear regulator datasheet

What LabWired simulates

What is simulated

Wiring only

How it was validated

Not applicable

AMS1117 LDO pinout

PinElectrical typeFunction
IN Power input Supply
GND power_out —
OUT power_out —

How to simulate the AMS1117 LDO in LabWired

  1. Open the Playground at app.labwired.com and place an MCU board.
  2. Add the AMS1117 LDO (catalog type ams1117).
  3. Connect IN to the supply and ground of the board.
  4. Connect GND and OUT as your circuit needs.
  5. The part has no runtime behaviour. LabWired checks its wiring: nets, rails and connectivity.

Related Passive, analog and power parts

All Passive, analog and power parts · All parts

Modelled from AMS1117 linear regulator datasheet.