NUCLEO-H563ZI

The NUCLEO-H563ZI is an MCU board in the LabWired part catalog. Its catalog type is nucleo-h563zi. Silicon coverage for this board is tracked in the chip × peripheral validation matrix, not per-part.

Key facts

Category	MCU boards
Catalog type	nucleo-h563zi
Datasheet	STM32H563xx datasheet

What LabWired simulates

How to simulate the NUCLEO-H563ZI in LabWired

1. Open the Playground at app.labwired.com and select the NUCLEO-H563ZI as the board.
2. Write the firmware, then build it and run it.
3. Add parts from the catalog and connect them to the board pins. The categories below list the parts by bus.
4. Before you trust a result, look at the validation matrix. It shows which chip peripherals are modelled and how each one was checked.

Parts to connect to the NUCLEO-H563ZI

• I²C devices (41)
• SPI devices (19)
• UART devices (7)
• Board I/O modules (50)
• Logic ICs (8)
• Passive, analog and power parts (37)
• Wireless (1)

Related MCU boards

• nucleo-l073rz datasheet linked
• nucleo-g474re datasheet linked
• nucleo-l476rg datasheet linked
• nucleo-g071rb datasheet linked
• nucleo-u545re datasheet linked
• nucleo-f407 datasheet linked
• nucleo-wb55rg datasheet linked
• NUCLEO-F401RE datasheet linked

All MCU boards · All parts

Further reading

• Run Arm's CMSIS-Zephyr CI example in LabWired

Modelled from STM32H563xx datasheet.