LabWired The easy way to build hardware
MCU board

Nucleo-G0B1RE

The Nucleo-G0B1RE is an MCU board in the LabWired part catalog. Its catalog type is nucleo-g0b1re. Silicon coverage for this board is tracked in the chip × peripheral validation matrix, not per-part.

Nucleo-G0B1RE in LabWired
Rendered by the matching LabWired editor component.

Key facts

CategoryMCU boards
Catalog typenucleo-g0b1re
DatasheetSTM32G0B1xB/xC/xE datasheet (DS13560)

What LabWired simulates

What is simulated

MCU board

How it was validated

Not applicable

How to simulate the Nucleo-G0B1RE in LabWired

  1. Open the Playground at app.labwired.com and select the Nucleo-G0B1RE as the board.
  2. Write the firmware, then build it and run it.
  3. Add parts from the catalog and connect them to the board pins. The categories below list the parts by bus.
  4. Before you trust a result, look at the validation matrix. It shows which chip peripherals are modelled and how each one was checked.

Parts to connect to the Nucleo-G0B1RE

Related MCU boards

All MCU boards · All parts

Modelled from STM32G0B1xB/xC/xE datasheet (DS13560).