LabWired The easy way to build hardware
MCU board

Nucleo-G431RB

The Nucleo-G431RB is an MCU board in the LabWired part catalog. Its catalog type is nucleo-g431rb. Silicon coverage for this board is tracked in the chip × peripheral validation matrix, not per-part.

Nucleo-G431RB in LabWired
Rendered by the matching LabWired editor component.

Key facts

CategoryMCU boards
Catalog typenucleo-g431rb
DatasheetSTM32G431x6/x8/xB datasheet (DS12589)

What LabWired simulates

What is simulated

MCU board

How it was validated

Not applicable

How to simulate the Nucleo-G431RB in LabWired

  1. Open the Playground at app.labwired.com and select the Nucleo-G431RB as the board.
  2. Write the firmware, then build it and run it.
  3. Add parts from the catalog and connect them to the board pins. The categories below list the parts by bus.
  4. Before you trust a result, look at the validation matrix. It shows which chip peripherals are modelled and how each one was checked.

Parts to connect to the Nucleo-G431RB

Related MCU boards

All MCU boards · All parts

Modelled from STM32G431x6/x8/xB datasheet (DS12589).