LabWired The easy way to build hardware
MCU board

ATmega328PB bare chip (TQFP-32)

The ATmega328PB bare chip (TQFP-32) is an MCU board in the LabWired part catalog. Its catalog type is atmega328pb. It has 32 pins. Silicon coverage for this board is tracked in the chip × peripheral validation matrix, not per-part.

ATmega328PB bare chip (TQFP-32) in LabWired
Rendered by the matching LabWired editor component.

Key facts

CategoryMCU boards
Catalog typeatmega328pb
Pins32
DatasheetATmega328PB datasheet (DS40001906A)

What LabWired simulates

What is simulated

MCU board

How it was validated

Not applicable

ATmega328PB bare chip (TQFP-32) pinout

PinElectrical typeFunction
PD3 Bidirectional —
PD4 Bidirectional —
PE0 Bidirectional —
VCC Power input Supply
GND Power input Supply
PE1 Bidirectional —
PB6 Bidirectional —
PB7 Bidirectional —
PD5 Bidirectional —
PD6 Bidirectional —
PD7 Bidirectional —
PB0 Bidirectional —
PB1 Bidirectional —
PB2 Bidirectional —
PB3 Bidirectional —
PB4 Bidirectional —
PB5 Bidirectional —
AVCC Power input Supply
PE2 Bidirectional —
AREF Power input Supply
GND Power input Supply
PE3 Bidirectional —
PC0 Bidirectional —
PC1 Bidirectional —
PC2 Bidirectional —
PC3 Bidirectional —
PC4 Bidirectional —
PC5 Bidirectional —
PC6 Bidirectional —
PD0 Bidirectional —
PD1 Bidirectional —
PD2 Bidirectional —

How to simulate the ATmega328PB bare chip (TQFP-32) in LabWired

  1. Open the Playground at app.labwired.com and select the ATmega328PB bare chip (TQFP-32) as the board.
  2. Write the firmware, then build it and run it.
  3. Add parts from the catalog and connect them to the board pins. The categories below list the parts by bus.
  4. Before you trust a result, look at the validation matrix. It shows which chip peripherals are modelled and how each one was checked.

Parts to connect to the ATmega328PB bare chip (TQFP-32)

Related MCU boards

All MCU boards · All parts

Modelled from ATmega328PB datasheet (DS40001906A).