LabWired The easy way to build hardware
MCU board

CH32V003F4P6 bare chip (TSSOP-20)

The CH32V003F4P6 bare chip (TSSOP-20) is an MCU board in the LabWired part catalog. Its catalog type is ch32v003f4p6. It has 20 pins. Silicon coverage for this board is tracked in the chip × peripheral validation matrix, not per-part.

CH32V003F4P6 bare chip (TSSOP-20) in LabWired
Rendered by the matching LabWired editor component.

Key facts

CategoryMCU boards
Catalog typech32v003f4p6
Pins20
DatasheetCH32V003 datasheet (CH32V003DS0 V1.8)

What LabWired simulates

What is simulated

MCU board

How it was validated

Not applicable

CH32V003F4P6 bare chip (TSSOP-20) pinout

PinElectrical typeFunction
PD4 Bidirectional —
PD5 Bidirectional —
PD6 Bidirectional —
PD7 Bidirectional —
PA1 Bidirectional —
PA2 Bidirectional —
VSS Power input Supply
PD0 Bidirectional —
VDD Power input Supply
PC0 Bidirectional —
PC1 Bidirectional —
PC2 Bidirectional —
PC3 Bidirectional —
PC4 Bidirectional —
PC5 Bidirectional —
PC6 Bidirectional —
PC7 Bidirectional —
PD1 Bidirectional —
PD2 Bidirectional —
PD3 Bidirectional —

How to simulate the CH32V003F4P6 bare chip (TSSOP-20) in LabWired

  1. Open the Playground at app.labwired.com and select the CH32V003F4P6 bare chip (TSSOP-20) as the board.
  2. Write the firmware, then build it and run it.
  3. Add parts from the catalog and connect them to the board pins. The categories below list the parts by bus.
  4. Before you trust a result, look at the validation matrix. It shows which chip peripherals are modelled and how each one was checked.

Parts to connect to the CH32V003F4P6 bare chip (TSSOP-20)

Related MCU boards

All MCU boards · All parts

Modelled from CH32V003 datasheet (CH32V003DS0 V1.8).