MCU board

RPi Pico

The RPi Pico is an MCU board in the LabWired part catalog. Its catalog type is rpi-pico. Silicon coverage for this board is tracked in the chip × peripheral validation matrix, not per-part.

Key facts

Category	MCU boards
Catalog type	`rpi-pico`
Datasheet	RP2040 datasheet

What LabWired simulates

What is simulated

MCU board

How it was validated

Not applicable. No device model to validate — see what is simulated, above.

How to simulate the RPi Pico in LabWired

Open the Playground at app.labwired.com and select the RPi Pico as the board.
Write the firmware, then build it and run it.
Add parts from the catalog and connect them to the board pins. The categories below list the parts by bus.
Before you trust a result, look at the validation matrix. It shows which chip peripherals are modelled and how each one was checked.

Parts to connect to the RPi Pico

I²C devices (41)
SPI devices (19)
UART devices (7)
Board I/O modules (50)
Logic ICs (8)
Passive, analog and power parts (37)
Wireless (1)

Related MCU boards

All MCU boards · All parts

Modelled from RP2040 datasheet.

Wire it up in Playground → See the full validation matrix