LabWired The easy way to build hardware
MCU board

Seeed XIAO nRF52840 Sense

The Seeed XIAO nRF52840 Sense is an MCU board in the LabWired part catalog. Its catalog type is seeed-xiao-nrf52840-sense. Silicon coverage for this board is tracked in the chip × peripheral validation matrix, not per-part.

Seeed XIAO nRF52840 Sense in LabWired
Rendered by the matching LabWired editor component.

Key facts

CategoryMCU boards
Catalog typeseeed-xiao-nrf52840-sense
DatasheetnRF52840 product specification

What LabWired simulates

What is simulated

MCU board

How it was validated

Not applicable

How to simulate the Seeed XIAO nRF52840 Sense in LabWired

  1. Open the Playground at app.labwired.com and select the Seeed XIAO nRF52840 Sense as the board.
  2. Write the firmware, then build it and run it.
  3. Add parts from the catalog and connect them to the board pins. The categories below list the parts by bus.
  4. Before you trust a result, look at the validation matrix. It shows which chip peripherals are modelled and how each one was checked.

Parts to connect to the Seeed XIAO nRF52840 Sense

Related MCU boards

All MCU boards · All parts

Further reading

Modelled from nRF52840 product specification.