STM32 Dev Board

The STM32 Dev Board is an MCU board in the LabWired part catalog. Its catalog type is stm32-dev. Silicon coverage for this board is tracked in the chip × peripheral validation matrix, not per-part.

Key facts

Category	MCU boards
Catalog type	stm32-dev
Datasheet	STM32F103x8/xB datasheet

What LabWired simulates

How to simulate the STM32 Dev Board in LabWired

1. Open the Playground at app.labwired.com and select the STM32 Dev Board as the board.
2. Write the firmware, then build it and run it.
3. Add parts from the catalog and connect them to the board pins. The categories below list the parts by bus.
4. Before you trust a result, look at the validation matrix. It shows which chip peripherals are modelled and how each one was checked.

Parts to connect to the STM32 Dev Board

• I²C devices (41)
• SPI devices (19)
• UART devices (7)
• Board I/O modules (50)
• Logic ICs (8)
• Passive, analog and power parts (37)
• Wireless (1)

Related MCU boards

• STM32F401 Black Pill (legacy type) datasheet linked
• seeed-xiao-nrf52840-sense datasheet linked
• STM32F401CDU6 Black Pill datasheet linked
• RPi Pico datasheet linked
• STM32F411CEU6 Black Pill datasheet linked
• RP2350-Zero datasheet linked
• STM32F746G-DISCO datasheet linked
• nucleo-wba52cg datasheet linked

All MCU boards · All parts

Further reading

• LabWired finds a CAN bug that occurs only on real hardware
• Run your PlatformIO unit tests with no hardware. You install nothing.

Modelled from STM32F103x8/xB datasheet.