LabWired The easy way to build hardware
MCU board

MCU

The MCU is an MCU board in the LabWired part catalog. Its catalog type is mcu. Silicon coverage for this board is tracked in the chip × peripheral validation matrix, not per-part.

MCU in LabWired
Rendered by the matching LabWired editor component.

Key facts

CategoryMCU boards
Catalog typemcu
DatasheetSTM32F103x8/xB datasheet

What LabWired simulates

What is simulated

MCU board

How it was validated

Not applicable

How to simulate the MCU in LabWired

  1. Open the Playground at app.labwired.com and select the MCU as the board.
  2. Write the firmware, then build it and run it.
  3. Add parts from the catalog and connect them to the board pins. The categories below list the parts by bus.
  4. Before you trust a result, look at the validation matrix. It shows which chip peripherals are modelled and how each one was checked.

Parts to connect to the MCU

Related MCU boards

All MCU boards · All parts

Modelled from STM32F103x8/xB datasheet.