nRF52840 DK

The nRF52840 DK is an MCU board in the LabWired part catalog. Its catalog type is nrf52840-dk. Silicon coverage for this board is tracked in the chip × peripheral validation matrix, not per-part.

Key facts

Category	MCU boards
Catalog type	nrf52840-dk
Datasheet	nRF52840 product specification

What LabWired simulates

How to simulate the nRF52840 DK in LabWired

1. Open the Playground at app.labwired.com and select the nRF52840 DK as the board.
2. Write the firmware, then build it and run it.
3. Add parts from the catalog and connect them to the board pins. The categories below list the parts by bus.
4. Before you trust a result, look at the validation matrix. It shows which chip peripherals are modelled and how each one was checked.

Parts to connect to the nRF52840 DK

• I²C devices (41)
• SPI devices (19)
• UART devices (7)
• Board I/O modules (50)
• Logic ICs (8)
• Passive, analog and power parts (37)
• Wireless (1)

Related MCU boards

• nrf5340-dk datasheet linked
• nrf52-dk datasheet linked
• nrf54l15 datasheet linked
• nano-33-iot datasheet linked
• nrf54lm20a datasheet linked
• microbit-v2 datasheet linked
• NUCLEO-F401RE datasheet linked
• metro-m4 datasheet linked

All MCU boards · All parts

Further reading

• Build a complete OBD-II scanner without a car and without hardware
• CRA secure-boot evidence in CI
• Run your PlatformIO unit tests with no hardware. You install nothing.
• SEGGER RTT without a J-Link

Modelled from nRF52840 product specification.