LabWired The easy way to build hardware
MCU board

K32W041AM DK6

The K32W041AM DK6 is an MCU board in the LabWired part catalog. Its catalog type is k32w041amdk6. Silicon coverage for this board is tracked in the chip × peripheral validation matrix, not per-part.

From the catalog: Closed-source model, linked into labwired-pro. This tree has the DK6 carrier only.

Key facts

CategoryMCU boards
Catalog typek32w041amdk6
DatasheetK32W041A/K32W041AM product data sheet, Rev. 1.2

What LabWired simulates

What is simulated

MCU board

How it was validated

Not applicable. No device model to validate — see what is simulated, above.

How to simulate the K32W041AM DK6 in LabWired

  1. Open the Playground at app.labwired.com and select the K32W041AM DK6 as the board.
  2. Write the firmware, then build it and run it.
  3. Add parts from the catalog and connect them to the board pins. The categories below list the parts by bus.
  4. Before you trust a result, look at the validation matrix. It shows which chip peripherals are modelled and how each one was checked.

Parts to connect to the K32W041AM DK6

Related MCU boards

All MCU boards · All parts

Modelled from K32W041A/K32W041AM product data sheet, Rev. 1.2.

Wire it up in Playground → See the full validation matrix