LabWired The easy way to build hardware
passive, analog or power part

MT3608 Boost Converter

The MT3608 Boost Converter is a passive, analog or power part in the LabWired part catalog. Its catalog type is mt3608. It has 4 pins. Placeable and checked electrically (nets, rails, connectivity), but it has no runtime behaviour of its own.

From the catalog: Boost converter; electrical only.

MT3608 Boost Converter in LabWired
Rendered by the matching LabWired editor component.

Key facts

CategoryPassive, analog and power parts
Catalog typemt3608
Pins4
DatasheetAerosemi MT3608 boost converter datasheet

What LabWired simulates

What is simulated

Wiring only

How it was validated

Not applicable

MT3608 Boost Converter pinout

PinElectrical typeFunction
IN+ Power input Supply
IN- Power input Supply
OUT+ power_out —
OUT- power_out —

How to simulate the MT3608 Boost Converter in LabWired

  1. Open the Playground at app.labwired.com and place an MCU board.
  2. Add the MT3608 Boost Converter (catalog type mt3608).
  3. Connect IN+ and IN- to the supply and ground of the board.
  4. Connect OUT+ and OUT- as your circuit needs.
  5. The part has no runtime behaviour. LabWired checks its wiring: nets, rails and connectivity.

Related Passive, analog and power parts

All Passive, analog and power parts · All parts

Modelled from Aerosemi MT3608 boost converter datasheet.