LabWired The easy way to build hardware
passive, analog or power part

MP1584 Buck Converter

The MP1584 Buck Converter is a passive, analog or power part in the LabWired part catalog. Its catalog type is mp1584. It has 4 pins. Placeable and checked electrically (nets, rails, connectivity), but it has no runtime behaviour of its own.

From the catalog: Buck converter; electrical only.

MP1584 Buck Converter in LabWired
Rendered by the matching LabWired editor component.

Key facts

CategoryPassive, analog and power parts
Catalog typemp1584
Pins4

What LabWired simulates

What is simulated

Wiring only

How it was validated

Not applicable

MP1584 Buck Converter pinout

PinElectrical typeFunction
IN+ Power input Supply
IN- Power input Supply
OUT+ power_out —
OUT- power_out —

How to simulate the MP1584 Buck Converter in LabWired

  1. Open the Playground at app.labwired.com and place an MCU board.
  2. Add the MP1584 Buck Converter (catalog type mp1584).
  3. Connect IN+ and IN- to the supply and ground of the board.
  4. Connect OUT+ and OUT- as your circuit needs.
  5. The part has no runtime behaviour. LabWired checks its wiring: nets, rails and connectivity.

Related Passive, analog and power parts

All Passive, analog and power parts · All parts