LabWired The easy way to build hardware
MCU board

nRF54L15 DK

The nRF54L15 DK is an MCU board in the LabWired part catalog. Its catalog type is nrf54l15. Silicon coverage for this board is tracked in the chip × peripheral validation matrix, not per-part.

nRF54L15 DK in LabWired
Rendered by the matching LabWired editor component.

Key facts

CategoryMCU boards
Catalog typenrf54l15
DatasheetnRF54L15 product specification

What LabWired simulates

What is simulated

MCU board

How it was validated

Not applicable

How to simulate the nRF54L15 DK in LabWired

  1. Open the Playground at app.labwired.com and select the nRF54L15 DK as the board.
  2. Write the firmware, then build it and run it.
  3. Add parts from the catalog and connect them to the board pins. The categories below list the parts by bus.
  4. Before you trust a result, look at the validation matrix. It shows which chip peripherals are modelled and how each one was checked.

Parts to connect to the nRF54L15 DK

Related MCU boards

All MCU boards · All parts

Further reading

Modelled from nRF54L15 product specification.