MCU board

nucleo-f407

The nucleo-f407 is an MCU board in the LabWired part catalog. Its catalog type is nucleo-f407. Silicon coverage for this board is tracked in the chip × peripheral validation matrix, not per-part.

Key facts

Category	MCU boards
Catalog type	`nucleo-f407`
Datasheet	STM32F407xx datasheet (DS8626)

What LabWired simulates

What is simulated

MCU board

How it was validated

Not applicable. No device model to validate — see what is simulated, above.

How to simulate the nucleo-f407 in LabWired

Open the Playground at app.labwired.com and select the nucleo-f407 as the board.
Write the firmware, then build it and run it.
Add parts from the catalog and connect them to the board pins. The categories below list the parts by bus.
Before you trust a result, look at the validation matrix. It shows which chip peripherals are modelled and how each one was checked.

Parts to connect to the nucleo-f407

Related MCU boards

All MCU boards · All parts

Modelled from STM32F407xx datasheet (DS8626).

Wire it up in Playground → See the full validation matrix