LabWired The easy way to build hardware
MCU board

NUCLEO-F103RB + BME280 smoke

The NUCLEO-F103RB + BME280 smoke is an MCU board in the LabWired part catalog. Its catalog type is stm32f103rb-nucleo-bme280-smoke. Silicon coverage for this board is tracked in the chip × peripheral validation matrix, not per-part.

NUCLEO-F103RB + BME280 smoke in LabWired
Rendered by the matching LabWired editor component.

Key facts

CategoryMCU boards
Catalog typestm32f103rb-nucleo-bme280-smoke
DatasheetSTM32F103x8/STM32F103xB datasheet (DS5319)

What LabWired simulates

What is simulated

MCU board

How it was validated

Not applicable

How to simulate the NUCLEO-F103RB + BME280 smoke in LabWired

  1. Open the Playground at app.labwired.com and select the NUCLEO-F103RB + BME280 smoke as the board.
  2. Write the firmware, then build it and run it.
  3. Add parts from the catalog and connect them to the board pins. The categories below list the parts by bus.
  4. Before you trust a result, look at the validation matrix. It shows which chip peripherals are modelled and how each one was checked.

Parts to connect to the NUCLEO-F103RB + BME280 smoke

Related MCU boards

All MCU boards · All parts

Further reading

Modelled from STM32F103x8/STM32F103xB datasheet (DS5319).