LabWired The easy way to build hardware
logic IC

74HC32 Quad OR

The 74HC32 Quad OR is a logic IC in the LabWired part catalog. Its catalog type is 74hc32. It connects to the MCU over GPIO. The catalog gives a supply range of 2–6 V. It has 14 pins. A registered peripheral model runs in the engine: the firmware talks to it over the real bus and gets device-accurate responses.

From the catalog: Quad 2-input OR (core/configs/devices/74hc32.yaml), 9 ns.

Key facts

CategoryLogic ICs
Catalog type74hc32
InterfaceGPIO
Supply range2–6 V
Pins14
DatasheetNexperia 74HC32 / 74HCT32 datasheet

What LabWired simulates

What is simulated

Simulated device model

How it was validated

Built from the datasheet. Implemented from the part’s register documentation and exercised by automated tests. Nothing physical was ever placed next to it.

74HC32 Quad OR pinout

PinElectrical typeFunction
A1 Input —
B1 Input —
Y1 Output —
A2 Input —
B2 Input —
Y2 Output —
A3 Input —
B3 Input —
Y3 Output —
A4 Input —
B4 Input —
Y4 Output —
VCC Power input Supply
GND Power input Supply

How to simulate the 74HC32 Quad OR in LabWired

  1. Open the Playground at app.labwired.com and place an MCU board.
  2. Add the 74HC32 Quad OR (catalog type 74hc32).
  3. Connect VCC and GND to the supply and ground of the board. Use a supply inside the catalog range of 2–6 V.
  4. Connect A1, B1, Y1, A2, B2, Y2, A3, B3, Y3, A4, B4 and Y4 as your circuit needs.
  5. Run the firmware. It drives and reads the pins of the part, and the device model responds on those pins.

Related Logic ICs

All Logic ICs · All parts

Modelled from Nexperia 74HC32 / 74HCT32 datasheet.

Wire it up in Playground → See the full validation matrix