passive, analog or power part

logic-level-shifter

The logic-level-shifter is a passive, analog or power part in the LabWired part catalog. Its catalog type is logic-level-shifter. The catalog gives a supply range of 1.8–5.5 V. It has 5 pins. Placeable and checked electrically (nets, rails, connectivity), but it has no runtime behaviour of its own.

Key facts

Category	Passive, analog and power parts
Catalog type	`logic-level-shifter`
Supply range	1.8–5.5 V
Pins	5

What LabWired simulates

What is simulated

Wiring only

How it was validated

Not applicable. No device model to validate — see what is simulated, above.

logic-level-shifter pinout

Power: HV, LV, GND
Other signals: HV_IN, LV_OUT

Pin	Electrical type	Function
`HV_IN`	Input	—
`LV_OUT`	Output	—
`HV`	Power input	Supply
`LV`	Power input	Supply
`GND`	Power input	Supply

How to simulate the logic-level-shifter in LabWired

Open the Playground at app.labwired.com and place an MCU board.
Add the logic-level-shifter (catalog type logic-level-shifter).
Connect HV, LV and GND to the supply and ground of the board. Use a supply inside the catalog range of 1.8–5.5 V.
Connect HV_IN and LV_OUT as your circuit needs.
The part has no runtime behaviour. LabWired checks its wiring: nets, rails and connectivity.

Related Passive, analog and power parts

All Passive, analog and power parts · All parts

No manufacturer datasheet is indexed for this part yet, so none is linked here.

Wire it up in Playground → See the full validation matrix