LabWired The easy way to build hardware
MCU board

Adafruit Feather STM32F405 Express

The Adafruit Feather STM32F405 Express is an MCU board in the LabWired part catalog. Its catalog type is feather-f405. Silicon coverage for this board is tracked in the chip × peripheral validation matrix, not per-part.

Adafruit Feather STM32F405 Express in LabWired
Rendered by the matching LabWired editor component.

Key facts

CategoryMCU boards
Catalog typefeather-f405
DatasheetSTM32F405xx datasheet (DS8626)

What LabWired simulates

What is simulated

MCU board

How it was validated

Not applicable

How to simulate the Adafruit Feather STM32F405 Express in LabWired

  1. Open the Playground at app.labwired.com and select the Adafruit Feather STM32F405 Express as the board.
  2. Write the firmware, then build it and run it.
  3. Add parts from the catalog and connect them to the board pins. The categories below list the parts by bus.
  4. Before you trust a result, look at the validation matrix. It shows which chip peripherals are modelled and how each one was checked.

Parts to connect to the Adafruit Feather STM32F405 Express

Related MCU boards

All MCU boards · All parts

Modelled from STM32F405xx datasheet (DS8626).