MCU board

metro-m4

The metro-m4 is an MCU board in the LabWired part catalog. Its catalog type is metro-m4. Silicon coverage for this board is tracked in the chip × peripheral validation matrix, not per-part.

Key facts

Category	MCU boards
Catalog type	`metro-m4`
Datasheet	SAM D5x/E5x Family Data Sheet (DS60001507)

What LabWired simulates

What is simulated

MCU board

How it was validated

Not applicable. No device model to validate — see what is simulated, above.

How to simulate the metro-m4 in LabWired

Open the Playground at app.labwired.com and select the metro-m4 as the board.
Write the firmware, then build it and run it.
Add parts from the catalog and connect them to the board pins. The categories below list the parts by bus.
Before you trust a result, look at the validation matrix. It shows which chip peripherals are modelled and how each one was checked.

Parts to connect to the metro-m4

Related MCU boards

All MCU boards · All parts

Modelled from SAM D5x/E5x Family Data Sheet (DS60001507).

Wire it up in Playground → See the full validation matrix