LabWired The easy way to build hardware
passive, analog or power part

TP4056 LiPo Charger

The TP4056 LiPo Charger is a passive, analog or power part in the LabWired part catalog. Its catalog type is tp4056. It has 6 pins. Placeable and checked electrically (nets, rails, connectivity), but it has no runtime behaviour of its own.

TP4056 LiPo Charger in LabWired
Rendered by the matching LabWired editor component.

Key facts

CategoryPassive, analog and power parts
Catalog typetp4056
Pins6
DatasheetTP4056 Li-ion charger datasheet

What LabWired simulates

What is simulated

Wiring only

How it was validated

Not applicable

TP4056 LiPo Charger pinout

PinElectrical typeFunction
IN+ Power input Supply
IN- Power input Supply
BAT+ Passive —
BAT- Passive —
OUT+ power_out —
OUT- power_out —

How to simulate the TP4056 LiPo Charger in LabWired

  1. Open the Playground at app.labwired.com and place an MCU board.
  2. Add the TP4056 LiPo Charger (catalog type tp4056).
  3. Connect IN+ and IN- to the supply and ground of the board.
  4. Connect BAT+, BAT-, OUT+ and OUT- as your circuit needs.
  5. The part has no runtime behaviour. LabWired checks its wiring: nets, rails and connectivity.

Related Passive, analog and power parts

All Passive, analog and power parts · All parts

Modelled from TP4056 Li-ion charger datasheet.