LabWired The easy way to build hardware
passive, analog or power part

Transistor

The Transistor is a passive, analog or power part in the LabWired part catalog. Its catalog type is transistor. It has 3 pins. Placeable and checked electrically (nets, rails, connectivity), but it has no runtime behaviour of its own.

Key facts

CategoryPassive, analog and power parts
Catalog typetransistor
Pins3

What LabWired simulates

What is simulated

Wiring only

How it was validated

Not applicable. No device model to validate — see what is simulated, above.

Transistor pinout

PinElectrical typeFunction
B Passive GPIO
C Passive —
E Passive —

How to simulate the Transistor in LabWired

  1. Open the Playground at app.labwired.com and place an MCU board.
  2. Add the Transistor (catalog type transistor).
  3. Connect B to a free GPIO pin.
  4. Connect C and E as your circuit needs.
  5. The part has no runtime behaviour. LabWired checks its wiring: nets, rails and connectivity.

Related Passive, analog and power parts

All Passive, analog and power parts · All parts

No manufacturer datasheet is indexed for this part yet, so none is linked here.

Wire it up in Playground → See the full validation matrix