LabWired The easy way to build hardware
passive, analog or power part

tvs-diode

The tvs-diode is a passive, analog or power part in the LabWired part catalog. Its catalog type is tvs-diode. It has 2 pins. No device model of its own. On a signal net it is an element of the in-core analog circuit, solved next to the running firmware; wired only across supply rails (a decoupling capacitor, for example) it stays wiring only. Semiconductor models are large-signal, with no device capacitance.

From the catalog: Level-1 diode with reverse breakdown (D line). Core card SMAJ5.0A: VBR 6.7 V, VC 9.2 V at 43.5 A. A bidirectional part (SMAJ5.0CA, or attrs.bidirectional) is two junctions back to back.

tvs-diode in LabWired
Rendered by the matching LabWired editor component.

Key facts

CategoryPassive, analog and power parts
Catalog typetvs-diode
Pins2
DatasheetVishay SMAJ5.0A thru SMAJ188CA TransZorb TVS datasheet

What LabWired simulates

What is simulated

Analog circuit element

How it was validated

Not applicable

tvs-diode pinout

PinElectrical typeFunction
A Passive —
K Passive —

How to simulate the tvs-diode in LabWired

  1. Open the Playground at app.labwired.com and place an MCU board.
  2. Add the tvs-diode (catalog type tvs-diode).
  3. Connect A and K as your circuit needs.
  4. Run the firmware. When the part is in an analog circuit, as described above, the in-core analog solver computes it next to the firmware.

Related Passive, analog and power parts

All Passive, analog and power parts · All parts

Modelled from Vishay SMAJ5.0A thru SMAJ188CA TransZorb TVS datasheet.