Solenoid / Electromagnet

The Solenoid / Electromagnet is a passive, analog or power part in the LabWired part catalog. Its catalog type is solenoid. It has 2 pins. Placeable and checked electrically (nets, rails, connectivity), but it has no runtime behaviour of its own.

From the catalog: Solenoid / holding electromagnet coil: series resistance (attrs.resistance, default 25 ohm) and inductance (attrs.inductance, default 10 mH) in the canvas analog circuit, so its current follows the real switch and flyback diode. No magnetic force, plunger travel or saturation.

Key facts

What LabWired simulates

Solenoid / Electromagnet pinout

• Other signals: +, -

How to simulate the Solenoid / Electromagnet in LabWired

1. Open the Playground at app.labwired.com and place an MCU board.
2. Add the Solenoid / Electromagnet (catalog type solenoid).
3. Connect + and - as your circuit needs.
4. The part has no runtime behaviour. LabWired checks its wiring: nets, rails and connectivity.

Related Passive, analog and power parts

• TMP36 Temperature Sensor Analog (ADC) · Built from the datasheet
• Soil Moisture Sensor Analog (ADC) · Built from the datasheet
• touch-pad Wiring only
• SN65HVD230 CAN Wiring only
• TP4056 LiPo Charger Wiring only
• slide-potentiometer Built from the datasheet
• Transistor Wiring only
• Sharp GP2Y0A21 IR Distance Sensor Analog (ADC) · Built from the datasheet

All Passive, analog and power parts · All parts

No manufacturer datasheet is indexed for this part yet, so none is linked here.